(888) 979-5190 Toll-Free
WEG 00112ST3QIE145TC-W22 00112ST3QIE145TC-W22

WEG 00112ST3QIE145TC-W22 General Purpose Motor

WEG 00112ST3QIE145TC-W22 Motor, 460 VAC, 1.73 A, 1 hp, 1160 rpm Speed, 0.75 kW, 3 ph -Phase, 60 Hz, 143/5TC Frame

WEG 00112ST3QIE145TC-W22 Motor, 460 VAC, 1.73 A, 1 hp, 1160 rpm Speed, 0.75 kW, 3 ph -Phase, 60 Hz, 143/5TC Frame 00112ST3QIE145TC-W22

The W22 IEEE 841 motors were especially designed to operate in petrochemical and chemical industries. The motor has cast iron frame, flexible-mounting, solid and whole feet, low noise levels, anti-corrosive internal coating and high efficiency.
WEG Motor, 460 VAC, 1.73 A, 1 hp, 1160 rpm, 0.75 kW, 3 ph Phase, 60 Hz, IC411 TEFC, IP55 Motor Enclosure, 143/5TC Frame, 7/8 in Dia x 2-1/4 in L Shaft, CW, CCW Rotation, Ball Bearing, 5.874 in Bolt Circle Diameter, 6 Poles, Continuous, Direct On Line Starting Method, Class F Insulation Class, NEMA Premium® Efficiency Motor Efficiency Group, 82.5 % Efficiency, 1.25 Service Factor, 0.66 Power Factor, C-Face Flange, F-1 Foot Mounting, Cast Iron, RAL 5009 Azure Blue, -20 to 40 deg C, 13.476 in L x 7.047 in W x 7.274 in H

Amperage Rating      :      1.73 A
Bearing Type      :      Ball
Bolt Circle Diameter      :      5.874 in
Color      :      RAL 5009 Azure Blue
Dimensions      :      13.476 in L x 7.047 in W x 7.274 in H
Duty Type      :      Continuous
Efficiency      :      82.5 %
Frame Size      :      143/5TC
Frequency Rating      :      60 Hz
HP Rating      :      1 hp
Insulation Class      :      Class F
Material      :      Cast Iron
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      IC411 TEFC, IP55
Mounting Type      :      C-Face Flange, F-1 Foot
Number of Poles      :      6
Phase      :      3 ph
Power Factor      :      0.66
Power Rating      :      0.75 kW
Rotation Type      :      CW, CCW
Service Factor      :      1.25
Shaft Size      :      7/8 in Dia x 2-1/4 in L
Speed Rating      :      1160 rpm
Starting Method      :      Direct On Line
Temperature Rating      :      -20 to 40 deg C
Voltage Rating      :      460 VAC
  • Stainless steel nameplate - laser etched with high contrast background
  • All frames with regreasable ball bearings
  • Inpro/seal bearing isolator both ends
  • Bearing protection meets IP56
  • Rubber lead separator between terminal box and frame
  • Vibration 0.04 in/s or less
  • Guaranteed foot flatness to within 0.005 in
  • Bearing life 50000 hr (L-10)
  • Epoxy paint system exceeds 250 hr salt spray test
  • Interior surfaces are epoxy-coated
  • Non-sparking fan
  • NPT threaded terminal box
  • Seamless copper lead lug
  • Seamless stainless steel grease extension tube
  • Automatic grease relief fitting
  • IEEE 841 link to test report in conduit box
  • Class F insulation (impregnation resin and magnet wire are class H)
  • Left position terminal box
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/WEG_1218OS1B48CH_S_Catalog.pdf