(888) 979-5190 Toll-Free
WEG 02018ET3H256TC-S 02018ET3H256TC-S

WEG 02018ET3H256TC-S General Purpose Motor

WEG 02018ET3H256TC-S General Purpose Motor, 575 V, 19.8 A, 20 hp, 1765 rpm Speed, 15 kW, 3 ph -Phase, 60 Hz

WEG 02018ET3H256TC-S General Purpose Motor, 575 V, 19.8 A, 20 hp, 1765 rpm Speed, 15 kW, 3 ph -Phase, 60 Hz 02018ET3H256TC-S

W01 is a rolled steel motor that is perfect for applications where performance, robustness and lightweight are required in an all one solution.
WEG General Purpose Motor, 575 V, 19.8 A, 20 hp, 1765 rpm, 15 kW, 3 ph Phase, 60 Hz, IC411 TEFC, IP55 Motor Enclosure, 254/6TC Frame, 1-5/8 in Dia x 4 in L Shaft, CW, CCW Rotation, Ball Bearing, 7.252 in Bolt Circle Diameter, 4 Poles, Continuous, Direct On Line Starting Method, Class F Insulation Class, NEMA Premium® Efficiency Motor Efficiency Group, 93 % Efficiency, 1.15 Service Factor, 0.82 Power Factor, C-Face Flange, F-1 Foot Mounting, Rolled Steel, Matte, Black, -20 to 40 deg C, 23.346 in L x 13.189 in W x 12.835 in H

Amperage Rating      :      19.8 A
Bearing Type      :      Ball
Bolt Circle Diameter      :      7.252 in
Color      :      Black
Dimensions      :      23.346 in L x 13.189 in W x 12.835 in H
Duty Type      :      Continuous
Efficiency      :      93 %
Finish      :      Matte
Frame Size      :      254/6TC
Frequency Rating      :      60 Hz
HP Rating      :      20 hp
Insulation Class      :      Class F
Material      :      Rolled Steel
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      IC411 TEFC, IP55
Mounting Type      :      C-Face Flange, F-1 Foot
Number of Poles      :      4
Phase      :      3 ph
Power Factor      :      0.82
Power Rating      :      15 kW
Rotation Type      :      CW, CCW
Service Factor      :      1.15
Shaft Size      :      1-5/8 in Dia x 4 in L
Speed Rating      :      1765 rpm
Starting Method      :      Direct On Line
Temperature Rating      :      -20 to 40 deg C
Voltage Rating      :      575 V
  • Aluminum end shields
  • Internal bolts, giving a clean surface to the motor, avoiding trapping materials and allowing easy paint job after assembly to the load if required
  • New ventilation system for improved thermal performance
  • Robust feet design suitable for tougher applications
  • Oversized diagonally split aluminum terminal box that exceeds IP55 requirements
  • Terminal box rotatable in 90 deg increments for flexibility during installation
  • IP55 ingress protection as standard, being appropriate for severe environments
  • Suitable for VFD operation as per NEMA MG1 part 31.4.4.2
  • Motor frame painting system 500 hr salt spray-resistant
  • Cast iron flanges for improved strength (182/4TC and larger)
  • New and more robust eyebolts design (frames 182/4T and up) plus a second eyebolt on non-drive end allowing vertical lifting capability (frames 213/5T and 254/6T)
  • Bearing cap as standard on flanged motor
  • Left position terminal box
  • Without overload protector
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/WEG_1218OS1B48CH_S_Catalog.pdf