Replacement for Kaeser 6.1985.0/A1 Spin-On Oil FilterReplacement for Kaeser 6.1985.0/A1 Spin-On Oil Filter 6.1985.0/A1
Oil Filters present the second barrier of protection. These are usually rated at 10 to 20 microns. Filter material is also paper or synthetic, and can be surface loading or depth loading. (contaminants enter the filter media and are trapped within the depth of the media, rather than only on the surface.)
Canister (Cartridge) Oil Filter Element - This consists of an element inside a metal canister. The canister must be opened, and the new filter installed inside the cavity. This element may be a variety of materials (metal mesh, synthetic, paper, or cloth) and will be manufactured with micron ratings compatible to the OEM specifications.
Spin-On Oil Filter Element - Simple removal by spinning off and replacing the element. Manufactured of synthetic, paper, metal mesh or cloth, with a micron rating which varies based on manufacturer specifications.
The proper selection and use of compressed air filters will prevent many short and long term problems with your compressed air equipment and systems and save you substantially in down-time and component replacement costs over the life of your compressed air system.
Our Oil Filter Replacements come with a manufacturer's warranty that matches or exceeds the original OEM warranty and specifications.
Original equipment manufacturer (OEM) names are the trademarks of each manufacturer. On products marked "replacement," OEM names and part numbers are for reference only.
eIndustrialSolutions is an independent supplier of aftermarket compressor replacement parts and is not affiliated with manufacturers mentioned in this web site. Original equipment manufacturer (OEM) names are the trademarks of each manufacturer. On products marked "equivalent" or "replacement," OEM names and part numbers are for reference only.