Aircel AEHD-1200 Heated Desiccant Air Dryers

The AEHD Series is an externally heated desiccant air dryer with mid-bed energy management based on relative humidity and a purge flow rate of 8% (6% with venturi option). High temperature paint, heater vessel and hot purge piping with insulation and aluminum jacket protects personnel and prevents heat loss. High efficiency, mounted pre-filter with zero loss drain and differential pressure gauges and after filter.
Aircel Externally Heated Desiccant Air Dryer, 3 in Inlet Connection, 100 deg F Inlet Air Temperature, Air Flow Rate: 1200 scfm, 100 psig Air Pressure,-40 deg F Dew Point Temperature, 100 deg F Maximum Temperature, Carbon Steel Housing, Activated Alumina Desiccant, 109 in Overall Height, 96 in Overall Width, 60 in Overall Depth

• Remote start/stop control
• Stainless steel desiccant sukports and air diffusers to prevent channeling
• Counter current regeneration, up flow drying and down flow depressurization
• 3/16 in premium-grade F200 activated alumina high capacity desiccant for pressure dew point performance
• Easy installation with single point connection for electrical supply power and inlet/outlet air connections
• Dry relay alarms for remote indication of system alarms
• Standard energy management system
• Adjustable (5 and 10 min) NEMA cycle
• Standard communication through RS-232/RS-485 combo port
• Each dryer equipped with mounted coalescing filter and desiccant dust after filter
• NEMA 4 controls standard