Apollo Valves 29402A125 Safety Relief Valve
Apollo® Valves 29 Series 29402A125 Safety Relief Valve, 1 x 1-1/4 in Nominal, MNPT x FNPT Connection, 1036 lb/hr
Apollo® Valves 29 Series 29402A125 Safety Relief Valve, 1 x 1-1/4 in Nominal, MNPT x FNPT Connection, 1036 lb/hr 29402A125- Brand Name: Apollo® Valves
- Part Number: 29402A125
- Check Stock
-
$554.00
Add To Favorites ListASME Sections I and VIII capacity certified safety valve for overpressure protection of steam power boilers, steam and air system, pressure vessels, piping and similar equipment. Compact and economic design ideal for OEM applications. The Apollo® 29 Series is ideally suited for OEM applications where compact size, dependable performance and maximum economy are required. These rugged safety valves feature a top guided design and patented PTFE soft seat for dramatically reduced seat leakage. Flow ratings are National Board certified.
Apollo® Valves Safety Relief Valve, Series: 29 Series, 1 x 1-1/4 in Nominal, MNPT x FNPT Connection, 125 psig, 1036 lb/hr Flow Rate, Steam Media, Lift Lever Actuator, Brass Trim, PTFE Softgoods, Bronze Body, 406 deg F, 6.7 in Height, Domestic/Import: Domestic
| Actuator Type | : | Lift Lever |
| Body Material | : | Bronze |
| Connection Type | : | MNPT x FNPT |
| Domestic/Import | : | Domestic |
| Flow Rate | : | 1036 lb/hr |
| Height | : | 6.7 in |
| Media | : | Steam |
| Nominal Size | : | 1 x 1-1/4 in |
| Pressure Rating | : | 125 psig |
| Series | : | 29 Series |
| Softgoods Material | : | PTFE |
| Temperature Rating | : | 406 deg F |
| Trim Material | : | Brass |
- PFA PTFE seat resists corrosive boiler chemicals
- 100% factory tested
- Made in USA
- Stainless steel springs are standard
- Rust-proof steel stem and spring washers
- Lower control ring ensures short, consistent blowdown
- Tapped body drain allows piping of condensate safely away from equipment
- Reduced repair costs, soft seat easily replaced
Instruction/Installation Manual