Apollo Valves 40-203-T2S Reduced Pressure Principle Backflow Preventer With Stainless Steel Ball Valve

The 3/8 to 1 in stainless steel reduced pressure principle backflow preventer shall be an Apollo® RP40S. The assembly shall be manufactured in America with all domestic components and parts. The stainless steel body shall be configured with individually-accessible top-access check valves including top mounted test cocks. The relief valve shall be bottom-centered with a separate access cover. The replaceable seat rings shall be glass-filled Noryl® and the reversible seat discs shall be silicone rubber. The Apollo® domestic shut-off ball valves shall have stainless steel handles. The assembly shall prevent contamination of the potable water supply due to back-siphonage or back pressure from substances that are health or non-health hazards. The pressure drop across the assembly shall be documented by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California approval curves.
Apollo® Valves Reduced Pressure Principle Backflow Preventer With Stainless Steel Ball Valve, Series: RPS 40 Series, 1/2 in Nominal, 175 psi, Water Media, T-Handle Actuator, 10-1/2 in Inlet to Outlet Length, 3-3/16 in Top to Inlet Center, 316 Stainless Steel Body, Lead-Free, 33 to 180 deg F, 6-7/8 in H x2-5/8 in W, Domestic/Import: Domestic

• Replaceable seats and reversible silicone seat discs
• Top mounted test cocks for easy testing
• Corrosion-resistant
• Made in the USA

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_40203T2S_Specification_Sheet.pdf