(888) 979-5190 Toll-Free
Apollo® Valves 86A-101-01 86A-101-01

Apollo Valves 86A-101-01 3-Piece Ball Valve

Apollo® Valves 86A-101-01 3-Piece Ball Valve, 1/4 in Nominal, NPT Connection, 150 psig, 1500 psig Pressure

Apollo® Valves 86A-101-01 3-Piece Ball Valve, 1/4 in Nominal, NPT Connection, 150 psig, 1500 psig Pressure 86A-101-01

Apollo® Valves 3-Piece Ball Valve, Series: 86A-100 Series, 1/4 in Nominal, NPT Connection, Full Port, Standard, 150 psig, 1500 psig, Gas, Water Media, Lever Actuator, 0.37 in Orifice, 2.8 in Inlet to Outlet Length, 3.02 in Top to Inlet Center, 8.1 Cv Flow Coefficient (Cv), ASTM A276, ASTM A351-CF8M, ASTM A351-CF3M Material Standard, Stainless Steel Body, 316 Stainless Steel Stem, Stainless Steel Trim, PTFE Packing, Stainless Steel Handle, 316 Stainless Steel Ball, RPTFE Softgoods, Lead-Free, Domestic/Import: Domestic

Actuator Type      :      Lever
Ball Material      :      316 Stainless Steel
Body Material      :      Stainless Steel
Configuration      :      Standard
Connection Type      :      NPT
Domestic/Import      :      Domestic
Flow Coefficient (Cv)      :      8.1 Cv
Handle Material      :      Stainless Steel
Inlet to Outlet Length      :      2.8 in
Lead-Free/Contains Lead      :      Lead-Free
Material Standard      :      ASTM A276, ASTM A351-CF8M, ASTM A351-CF3M
Media      :      Gas, Water
Nominal Size      :      1/4 in
Orifice Size      :      0.37 in
Packing Material      :      PTFE
Port Type      :      Full
Pressure Rating      :      150 psig, 1500 psig
Series      :      86A-100 Series
Softgoods Material      :      RPTFE
Stem Material      :      316 Stainless Steel
Top to Inlet Center      :      3.02 in
Trim Material      :      Stainless Steel
  • Three-piece construction with enclosed fasteners
  • Stainless steel trim and hardware
  • Swing-out center section
  • Pressure balanced solid ball
  • Compression controlled RPTFE gaskets
  • Anti-blowout one-piece bottom entry stem
  • Two-position locking
  • Adjustable multi-piece PTFE "V" style packing
  • Fully machined ISO 5211 mounting
  • Cast bosses on the center section and end caps for bleed and drain ports
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_86A_103_T01_Instruction_Installation_Manual.pdf
  • pdfLine Drawing https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_86A_103_T01_Line_Drawing.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_86A_103_T01_Specification_Sheet.pdf