(888) 979-5190 Toll-Free
ASCO 215070B01 215070B01

ASCO 215070B01 Pilot Solenoid Valve

Asco 215070B01 Pilot Solenoid Valve, 1-1/2 in Nominal, FNPT Connection, 2-Ways-Port/Way, 150 to 500 psi Pressure

Asco 215070B01 Pilot Solenoid Valve, 1-1/2 in Nominal, FNPT Connection, 2-Ways-Port/Way, 150 to 500 psi Pressure 215070B01

The ASCO Series 215 is an aluminum body, lightweight solenoid valve for high flow, low pressure air or gas service. The pilot operated construction works from zero pressure differential with resilient soft seating for tight shut off. Optional long life design eliminates metal-to-metal contact to extend life up to 20 million cycles. The 215 Series is ideal for vacuum service and heating equipment applications.
ASCO Pilot Solenoid Valve, Series: 215, 1-1/2 in Nominal, FNPT Connection, NPTF Port, Normally Closed, 150 to 500 psi, Air, Inert Gas, Liquid Propane Gas, Natural Gas and Oxygen Media, 41 mm Orifice, 120 VAC, 50/60 Hz, Class F Coil Insulation Class, 2-Ways, NEMA 1, 2, 3, 3S, 4, 4X, 6, 6P, 7, 9 Enclosure, Aluminum Body, Aluminum/Stainless Steel Seat, NBR Seal, PA Disc, PTFE Softgoods, -20 to 85 deg C

Body Material      :      Aluminum
Coil Insulation Class      :      Class F
Configuration      :      Normally Closed
Connection Type      :      FNPT
Disc Material      :      PA
Enclosure Type      :      NEMA 1, 2, 3, 3S, 4, 4X, 6, 6P, 7, 9
Frequency Rating      :      50/60 Hz
Media      :      Air, Inert Gas, Liquid Propane Gas, Natural Gas and Oxygen
Nominal Size      :      1-1/2 in
Number of Ports/Ways      :      2-Ways
Orifice Size      :      41 mm
Port Type      :      NPTF
Pressure Rating      :      150 to 500 psi
Seal Material      :      NBR
Seat Material      :      Aluminum/Stainless Steel
Series      :      215
Softgoods Material      :      PTFE
Temperature Rating      :      -20 to 85 deg C
Voltage Rating      :      120 VAC
  • Due to the resilient soft seating, these valves are ideal for high flow low pressure air and gas applications
  • The valves are for the control of low pressure air and gases, compatible with the seal materials used
  • Aluminum bodied valves designed to provide maximum flow
  • The valve have a resilient soft seating for tight shut-off
  • Valves do not require a minimum operating pressure
  • All products are covered by pressure equipment Directive 2014/68/EU and are suitable for group 1 and 2 fluids
  • The solenoid valves satisfy all relevant EU directives