ASCO 8215G023 Solenoid Valve

Asco 8215G023 Solenoid Valve, 1/2 in Nominal, NPT Connection, 2 -Port/Way, 3.4 cu-m/hr, 125 psi Pressure

Asco 8215G023 Solenoid Valve, 1/2 in Nominal, NPT Connection, 2 -Port/Way, 3.4 cu-m/hr, 125 psi Pressure 8215G023

The ASCO 215 Series is an aluminum body, lightweight solenoid valve for high flow, low pressure air or gas service. The pilot operated construction works from zero pressure differential with resilient soft seating for tight shut-off. Optional long life design eliminates metal to metal contact to extend life up to 20 million cycles. The 8215 Series is ideal for vacuum service and heating equipment applications.
ASCO Solenoid Valve, Series: 8215 Series, 1/2 in Nominal, NPT Connection, NO, 125 psi, 3.4 cu-m/hr Flow Rate, Air, Fuel Gas, Inert Gas Media, 3/4 in Orifice, 2-3/4 in Inlet to Outlet Length, 3.86 in Top to Inlet Center, FT Coil Insulation Class, 2 Positions, 2, Aluminum Body, NBR Seat, NBR Seal, NBR Disc, Stainless Steel Trim, PTFE Softgoods, 32 to 125 deg F, 2.75 in W x 4.42 in H, Additional Information: 120/110 VAC Voltage Rating, 50/60 Hz Frequency Rating

Additional Information      :      120/110 VAC Voltage Rating, 50/60 Hz Frequency Rating
Body Material      :      Aluminum
Coil Insulation Class      :      FT
Configuration      :      NO
Connection Type      :      NPT
Dimensions      :      2.75 in W x 4.42 in H
Disc Material      :      NBR
Flow Rate      :      3.4 cu-m/hr
Inlet to Outlet Length      :      2-3/4 in
Media      :      Air, Fuel Gas, Inert Gas
Nominal Size      :      1/2 in
Number of Ports/Ways      :      2
Number of Positions      :      2
Orifice Size      :      3/4 in
Pressure Rating      :      125 psi
Seal Material      :      NBR
Seat Material      :      NBR
Series      :      8215
Softgoods Material      :      PTFE
Temperature Rating      :      32 to 125 deg F
Top to Inlet Center      :      3.86 in
Trim Material      :      Stainless Steel
  • Provides high flow with Cv up to 138 (KV 118)
  • Due to the resilient soft seating, these valves are ideal for high flow low pressure air and gas applications
  • A full range of pipe sizes up to 3 in with both normally closed and normally open constructions
  • Wide range of standard AC and DC voltages
  • Lightweight, low cost valves for air service
  • Air and vacuum service