ASCO S262SG02N3GJ7 S262SG02N3GJ7

ASCO S262SG02N3GJ7 Gas Vent Solenoid Valve

Asco S262SG02N3GJ7 Gas Vent Solenoid Valve, 1-1/4 in Nominal, 2-Way -Port/Way, 0 to 25 psi Differential Pressure

Asco S262SG02N3GJ7 Gas Vent Solenoid Valve, 1-1/4 in Nominal, 2-Way -Port/Way, 0 to 25 psi Differential Pressure S262SG02N3GJ7

Asco Gas Vent Solenoid Valve, 1-1/4 in Nominal, 0 to 25 psi Differential, 2 in Orifice, Coil Insulation Class: N, 2-Way Ports/Ways, NEMA 1, Aluminum Body, NBR Seal, NBR Disc, Die-Cast, -20 to 175 deg F, 77 deg F Fluid, 4.76 in L x 4.77 in W x 8.49 in H

Body Material      :      Aluminum
Coil Insulation Class      :      N
Dimensions      :      4.76 in L x 4.77 in W x 8.49 in H
Disc Material      :      NBR
Enclosure Type      :      NEMA 1
Finish      :      Die-Cast
Nominal Size      :      1-1/4 in
Number of Ports/Ways      :      2-Way
Orifice Size      :      2 in
Pressure Rating      :      0 to 25 psi Differential
Seal Material      :      NBR
Temperature Rating      :      -20 to 175 deg F, 77 deg F Fluid
  • Zero differential piloted diaphragm
  • Valves provided with pipe taps with plug for routine testing
  • 302 stainless steel washer, 305 stainless steel core tube, 430F stainless steel core and plugnut, 302F stainless steel springs, 416 stainless steel sleeve and pin
  • CA core guide
  • Copper shading coil
  • Cork body gasket
  • Zinc-plated steel pipe plug
  • Type 1 general purpose junction box housing with (2) 7/8 in knock-outs solenoid enclosure
  • Less than 1 sec maximum valve opening and closing time
  • 1710000 Btu/hr nominal capacity
  • 120 VAC at 60 Hz voltage rating
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Asco_S262SG02N3CG5_Specification_Sheet.pdf