Cutler-Hammer D15CR22AB D15CR22AB

Cutler-Hammer D15CR22AB Machine Tool Relay

Cutler-Hammer D15 Series D15CR22AB Machine Tool Relay, 10 A, 2NO-2NC, 110/120 V Coil

Cutler-Hammer D15 Series D15CR22AB Machine Tool Relay, 10 A, 2NO-2NC, 110/120 V Coil D15CR22AB

Contact poles on the D15 relay are of the fixed design and are not convertible. The basic four-pole relay will accept a front-mounted contact pole deck and/or side-mounted contact blocks (one per side). In addition, a side-mounted solid-state timer or a front-mounted pneumatic timer can be added to the relay. Only one front-mounted attachment can be added to the basic relay.

Amperage Rating      :      10 A
Coil Voltage      :      110/120 V
Contact Configuration      :      2NO-2NC
Contact Rating      :      60 A
Depth      :      3.79 in
Frequency Rating      :      50/60 Hz
Height      :      2.599 in
Input Voltage      :      600 V
Mounting Type      :      DIN Rail
Number of Poles      :      4
Series      :      D15 Series
Terminal Type      :      Finger Safe, Self-Lifting Pressure Plate
Width      :      4 in
  • 600 V, 10 A continuous thermal current
  • State indicator visually shows relay on or off status
  • Relay base has mounting holes on 35 x 60 mm centers, permitting direct replacement of competitive relays
  • Relay also mounts on 35 mm DIN rail as standard
  • Magnet coil has three terminals, permitting either top or diagonal wiring, easy to replace European or US relays without changing wiring layout
  • Contact pole terminals have captive, backed out, self-lifting pressure plates with +/- screws - reduced wiring time
  • All terminals are shrouded or "finger-proofed" to reduce possibility of electrical shock
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Cutler_Hammer_D15CR22AB_Specification_Sheet.pdf