Cutler-Hammer TL480N25 TL480N25

Cutler-Hammer TL480N25 Torque Limiter Controller

Cutler-Hammer TL480N25 Torque Limiter Controller, 208 to 480/208 to 240 V, 25 A, 15 hp

Cutler-Hammer TL480N25 Torque Limiter Controller, 208 to 480/208 to 240 V, 25 A, 15 hp TL480N25

The TL device line of Starting Torque Limiters is designed for the soft start of 3-phase or single-phase motors, i.e., it allows smoother starting of all AC induction motors, thus decreasing shock and vibration problems encountered during across-the-line starts. The device is ramp-up time/torque adjustable from .5 – 5 sec/0 – 85% of nominal starting torque.

Additional Information      :      -30 to 80 deg C Storage Temperature, 95% Non-Condensing Relative Humidity
Amperage Rating      :      25 A
Depth      :      5.04 in
Frequency Rating      :      50/60 Hz
HP Rating      :      15 hp
Height      :      3.94 in
Leakage Current      :      5 mA
Phase      :      1 ph, 3 ph
Temperature Rating      :      -30 to 40 deg C
Voltage Rating      :      208 to 480/208 to 240 V
Wattage      :      12.5 kW, 7.5 kW
Width      :      1.77 in
  • Reduced wear on belts, gears, chains, clutches, shafts and bearings
  • Compact design allows easy installation and smaller enclosures
  • Less shock to product on conveyor lines and material handling gear
  • IP20 finger protection
  • Unlimited number of START/STOP operations per hour
  • Adjustable initial torque control (0 - 85%)
  • Adjustable ramp times (0.5 - 5 sec)
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Cutler_Hammer_TL480N25_Catalog.pdf