Donaldson 1C597391 Ultrapac 2000 Superplus 0035M 24V (OEM)

Compressed air is led through the inlet of the dryer (1) and across the pre-filter (2). At this stage, the air is cleaned from particles and condensate. The condensate is removed via the membrane condensate drain (3). Via the lower shuttle valve (4), the air is led into desiccant cartridges (5), in which the air is dried down to the required dew point. Via the upper shuttle valve (6), the air gets into an after filter (7), in which particles from the desiccant are retained. Via the outlet (8), the clean and dry air is lead into the compressed air network to the point of use. While one vessel with desiccant cartridge is in the drying phase (adsorption), the other cartridge is being dried again (regeneration). A partial stream of dried air is expanded via an orifice and lead across the desiccant cartridge for regeneration and via a solenoid valve and a silencer system to the atmosphere.
Donaldson® Heatless Adsorption Dryer, Ultrapac® 2000 Superplus Series, 24 VDC, 1 in Inlet Connection, 4 to 16 bar Air Pressure, -40 deg C Dew Point Temperature, 4 to 50 deg C Maximum Temperature, 665 mm Overall Height, 531 mm Overall Width, 195 mm Overall Depth

• Intermittent operation standard
• Throttle package
• Load control
• Self-diagnosis system
• Text display
• Info channel
• Economizer function

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C580040_Catalog.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C597391_Specification_Sheet.pdf