(888) 979-5190 Toll-Free
Glasfloss® M1320244 M1320244

Glasfloss M1320244 Pleated Air Filter

Glasfloss® Z-Line MR-13 M1320244 Pleated Air Filter, Synthetic Fiber Media, 20 in W, 24 in H, 4 in D, 13 MERV

Glasfloss® Z-Line MR-13 M1320244 Pleated Air Filter, Synthetic Fiber Media, 20 in W, 24 in H, 4 in D, 13 MERV M1320244

The Glasfloss Z-Line series MR-13 pleated air filter features the latest in media technology to achieve MERV 13 while maintaining low pressure drop and good service life. The new Z-Line series MR-13 pleat is optimized for "LEED" compliance in new and existing buildings as well as providing a cost-effective upgrade from lower efficiency pleated filters for a variety of commercial and industrial applications.
Glasfloss® Pleated Air Filter, Series: Z-Line MR-13, Synthetic Fiber Media, Beverage Board Frame, 20 in Width, 24 in Height, 4 in D, MERV: 13, 22.27 sq-ft Media Area, 500 fpm Rated Velocity, 0.37 in-WG Initial Resistance, 1 in-WG Final Resistance, 19-3/4 x 23-3/4 x 3-3/4 in Actual, 180 deg F

Actual Size      :      19-3/4 x 23-3/4 x 3-3/4 in
Depth      :      4 in
Final Resistance      :      1 in-WG
Frame Material      :      Beverage Board
Height      :      24 in
Initial Resistance      :      0.37 in-WG
MERV      :      13
Media Area      :      22.27 sq-ft
Media Material      :      Synthetic Fiber
Rated Velocity      :      500 fpm
Series      :      Z-Line MR-13
Temperature Rating      :      180 deg F
Width      :      20 in
  • The media incorporates 100% synthetic fibers that are electrostatically charged
  • The filter fibers are thermally bonded and manufactured in an engineered gradient structure
  • An expanded metal reinforcement shall be laminated to the air-exit side of the media by a thermo-setting adhesive to maintain continuity of the radial pleats
  • The expanded metal shall be galvanized to resist rust and corrosion
  • The media shall be pleated in a tapered radial configuration
  • The pleated cartridge shall be bonded to the peripheral interior of the outer frame
  • A heavy-duty moisture-resistant beverage board incorporating post-consumer material shall be utilized for an encasing frame
  • The frame shall be internally laminated to the pleated cartridge aPEXes
  • Made in the U.S.A
  • pdfFull Engineering Drawing https://assets.unilogcorp.com/267/ITEM/DOC/Glasfloss_M1310182_Full_Engineering_Drawing.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Glasfloss_M1310182_Specification_Sheet.pdf