(888) 979-5190 Toll-Free
Glasfloss® ZLN141314AC ZLN141314AC

Glasfloss ZLN141314AC Pleated Air Filter

Glasfloss® Carbotron® Z-Line ZLN141314AC Pleated Air Filter, Synthetic Fiber Media, 14 in W, 13 in H, 1 in D, 8 MERV

Glasfloss® Carbotron® Z-Line ZLN141314AC Pleated Air Filter, Synthetic Fiber Media, 14 in W, 13 in H, 1 in D, 8 MERV ZLN141314AC

Cigarette smoke, vehicle exhaust, and cooking odors, along with thousands of other activities generate unpleasant odors. The solution to these problems and many offensive odors associated with Indoor Air Quality is the Z-Line Series Carbotron Pleat. The activated carbon used in the Carbotron Pleat has millions of tiny openings that adsorb odorous gas molecules from the air, so clean fresh smelling air remains. The Carbotron Pleat is offered in a wide range of standard and special sizes that allow installation in almost any Air Conditioning, Heating or Ventilating application.
Glasfloss® Carbotron® Pleated Air Filter, Series: Z-Line, Synthetic Fiber Media, Beverage Board Frame, 14 in Width, 13 in Height, 1 in D, MERV: 8, 16 Pleats per Linear Feet, 300 fpm Rated Velocity, 0.18 in-WG Initial Resistance, 1 in-WG Final Resistance, 180 deg F

Depth      :      1 in
Final Resistance      :      1 in-WG
Frame Material      :      Beverage Board
Height      :      13 in
Initial Resistance      :      0.18 in-WG
MERV      :      8
Media Material      :      Synthetic Fiber
Pleats per Linear Feet      :      16
Rated Velocity      :      300 fpm
Series      :      Z-Line
Temperature Rating      :      180 deg F
Width      :      14 in
  • Thermally bonded 100% synthetic fibers media
  • A heavy-duty moisture-resistant beverage board incorporating post-consumer material shall be utilized for an encasing frame
  • The expanded metal shall be galvanized to resist rust and corrosion
  • Filter is an extended surface pleated media-type filter
  • The media shall be pleated in a tapered radial configuration
  • An expanded metal reinforcement shall be laminated to the air-exit side of the media by a thermo-setting adhesive to maintain continuity of the radial pleats
  • The pleated cartridge shall be bonded to the peripheral interior of the outer frame
  • The frame face shall be internally laminated to the pleated cartridge aPEXes
  • Double wall beverage board
  • High dust holding capacity
  • Increased initial efficiency
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Glasfloss_ZLN123014AC_Specification_Sheet.pdf