(888) 979-5190 Toll-Free
Pneumatech 8102354159 IDI_152079

Pneumatech PH-390 HE Heatless Desiccant Dryer, Welded Design (370 SCFM @ 180 PSI @ -100F PDP)

Pneumatech PH Series 8102354159 Welded Heatless Desiccant Air Dryer, 1-1/2 in Inlet Connection, 647 scfm Air

Pneumatech PH Series 8102354159 Welded Heatless Desiccant Air Dryer, 1-1/2 in Inlet Connection, 647 scfm Air 8102354159

Incorporating high quality components, PH heatless desiccant dryers provide you with clean, dry air to extend the life of your equipment and products. Heatless desiccant dryers use the compressed air to remove any moisture from the desiccant material.
Pneumatech Welded Heatless Desiccant Air Dryer, 1-1/2 in Inlet Connection, 1-1/2 in Outlet Connection, 100 deg F Inlet Air Temperature, Air Flow Rate: 647 scfm, 232 psig Air Pressure,-100 deg F Dew Point Temperature, 71 in Overall Height, 35 in Overall Width, 43 in Overall Depth

Air Flow Rate      :      647 scfm
Air Pressure      :      232 psig
Dew Point Temperature      :      -100 deg F
Inlet Air Temperature      :      100 deg F
Inlet Connection Size      :      1-1/2 in
Outlet Connection Size      :      1-1/2 in
Overall Depth      :      43 in
Overall Height      :      71 in
Overall Width      :      35 in
  • PureLogic™ controller featuring cycle sight shows cycle time and tower status
  • High quality, two way pilot operated inlet switching valves
  • Free contact to link dryer operation to compressor load cycles
  • Adjustable purge control
  • Status memory to resume operation where dryer left-off
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Pneumatech_8102353904_Catalog.pdf