Pneumatech PMR-17500 Mist Eliminator (17500 SCFM, 12" FLG Connections)

With only 10% of the pressure drop of a regular coalescing filter and an expected service life 20 to 30X longer than conventional filers, the PMR Series is the only choice for efficient removal of mist sized particles.
Pneumatech Mist Eliminator, Series: PMR Series, Model: PMR-17500, 12 in Port, Flange Connection, 17500 scfm Upstream, 18267 scfm Downstream Flow Rate, 100 psig Pressure, Filter Rating: 1 um, 70 deg F, 36 in Diameter, 232 in Overall Height

• Vessel design - optimally sized vessel needed to capture condensate effectively with filter located below outlet to protect from any carryover and large clearance for proper bed velocity
• Rating - PMR mist eliminator is rated for use in a wet air stream, so will withstand liquid slugging and catastrophic failure of a compressor separator element
• The best protection available from air/oil separator collapse or condensate trap failure
• Low operating and energy cost, with payback often within one year
• Extends the life of desiccant dryer bed, if installed upstream, thereby reducing maintenance cost
• Fiber bed - homogeneous sized fibers, hand packed to a specific density
• Removes 100% of all aerosol mist particles 1 um and larger and removes 99.5% of all aerosol sub-micron mist particles
• No need to replace elements within 10 years - low maintenance
• Low pressure differential over element life, equals a lifetime of energy savings
• Consistent and reliable performance

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Pneumatech_4103014870_Catalog.pdf