RegO 1786AE Heavy-Duty Gas Line Pressure Regulator With EPDM Seat Disc

REGO® 1780 Series 1786AE Heavy-Duty Gas Line Pressure Regulator With EPDM Seat Disc, O-Ring, 3/4 in Nominal, 30000 scfm

REGO® 1780 Series 1786AE Heavy-Duty Gas Line Pressure Regulator With EPDM Seat Disc, O-Ring, 3/4 in Nominal, 30000 scfm 1786AE

REGO® Heavy-Duty Gas Line Pressure Regulator With EPDM Seat Disc, O-Ring, Series: 1780 Series, 3/4 in Nominal, FNPT Connection, 500 psig, 5 to 55 psig, 30000 scfm Flow Rate, Argon, Carbon Dioxide, Hydrogen, Helium, LNG, Nitrogen, Oxygen Media, 3.31 in Inlet to Outlet Length, 1.6 in Top to Inlet Center, 4.8 Cv Flow Coefficient (Cv), Forged Brass Body, -40 to 165 deg F, 4.69 in Dia

Body Material      :      Forged Brass
Connection Type      :      FNPT
Dimensions      :      4.69 in Dia
Flow Coefficient (Cv)      :      4.8 Cv
Flow Rate      :      30000 scfm
Inlet to Outlet Length      :      3.31 in
Media      :      Argon, Carbon Dioxide, Hydrogen, Helium, LNG, Nitrogen, Oxygen
Nominal Size      :      3/4 in
Pressure Rating      :      500 psig, 5 to 55 psig
Series      :      1780 Series
Temperature Rating      :      -40 to 165 deg F
Top to Inlet Center      :      1.6 in
  • Maintains a steady downstream pressure across a range of inlet pressures commonly provided by a cryogenic bulk tank
  • Large seat and diaphragm areas provide high capacity with sensitive control of delivery pressure with low falloff
  • Two 1/4 in FNPT plugged delivery pressure gauge ports are located on each side of the valve
  • Two bonnet drain/vent holes to allow for various mounting orientations
  • Bonnet cap covering adjusting screw for tamper protection
  • Cleaned for oxygen service per CGA G-4.1
  • 100% factory tested
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/REGO_15578_Catalog.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/REGO_1784A_Specification_Sheet.pdf