REGO® AR4106A285 AR4106A285

RegO AR4106A285 Angle Pressure Relief Valve

REGO® AR4106A285 Angle Pressure Relief Valve, 3/4 in NPT Inlet Connection, 1 in NPT Outlet Connection, 285 PSI Pressure, ASME Rated

REGO® AR4106A285 Angle Pressure Relief Valve, 3/4 in NPT Inlet Connection, 1 in NPT Outlet Connection, 285 PSI Pressure, ASME Rated AR4106A285

The AR Series 90 Degree relief valves are ASME approved and provide precise relief set points which protect cryogenic vessels and piping systems for over-pressurization


REGO® Angle Pressure Relief Valve, Series: AR Series, 3/4 in Inlet Connection, Thread NPT Inlet Connection, 1 in Outlet Connection, NPT Outlet Connection, 285 psi Factory Set Pressure, -320 to 165 deg F Operating, Brass/Stainless Steel Trim, PTFE Softgoods, Bronze/Stainless Steel Body, 1.97 in Inlet to Outlet Length, 6.03 in Overall Height, Air Media

Body Material      :      Bronze/Stainless Steel
Factory Set Pressure      :      285 psi
Inlet Connection Size      :      3/4 in
Inlet Connection Type      :      Thread NPT
Inlet to Outlet Length      :      1.97 in
Media Type      :      Air
Operating Temperature      :      -320 to 165 deg F
Outlet Connection Size      :      1 in
Outlet Connection Type      :      NPT
Overall Height      :      6.03 in
Series      :      AR Series
Softgoods Material      :      PTFE
Trim Material      :      Brass/Stainless Steel
  • High flow rates are approved by rigorous testing to ASME code VIII
  • The 90 deg configuration provides relief of gases eliminating direct flow through the spring
  • Bubble tight seat provides 100% shut off when reseating or static mode
  • A variety of inlets and pressure settings assure adherence to application requirements
  • Cleaned for liquid oxygen service per CGA G-4.1
  • 100% factory tested
  • pdfSpecification Sheet https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/rego_ar4100_series_specs.pdf
  • pdfCatalog https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/rego_catalog.pdf