Oil Filters Oil Filters present the secondbarrier of protection. These are usually rated at 10 to 20 microns.Filter material is also paper or synthetic, and can be surfaceloading or depth loading. (contaminants enter the filter media andare trapped within the depth of the media, rather than only on thesurface.) Canister (Cartridge) OilFilter Element - This consists of an element inside ametal canister. The canister must be opened, and the new filterinstalled inside the cavity. This element may be a variety ofmaterials (metal mesh, synthetic, paper, or cloth) and will bemanufactured with micron ratings compatible to the OEMspecifications. Spin-On Oil FilterElement - Simple removal by spinning off and replacing theelement. Manufactured of synthetic, paper, metal mesh or cloth,with a micron rating which varies based on manufacturerspecifications. The proper selection and use ofcompressed air filters will prevent many short and long termproblems with your compressed air equipment and systems and saveyou substantially in down-time and component replacement costs overthe life of your compressed air system. Our Oil Filter Replacements come witha manufacturer's warranty that matches or exceeds the original OEMwarranty and specifications. Original equipmentmanufacturer (OEM) names are the trademarks of each manufacturer.On products marked "replacement," OEM names and part numbers arefor reference only. eIndustrialSolutions is anindependent supplier of aftermarket compressor replacement partsand is not affiliated with manufacturers mentioned in this website. Original equipment manufacturer (OEM) names are thetrademarks of each manufacturer. On products marked "equivalent" or"replacement," OEM names and part numbers are for referenceonly.