SOLON® 8F80177 Flange Washer, Imperial, 1/2 in, 0.512 in ID, 0.9 in OD, 0.082 in Thick, Stainless Steel, Plain
SOLON® 8F80177 Flange Washer, Imperial, 1/2 in, 0.512 in ID, 0.9 in OD, 0.082 in Thick, Stainless Steel, Plain 8F80177Certain industries that utilize piping flange joint assemblies, such as petrochemical, dictate a low tolerance for fugitive emissions. Flange live loading, which is a process imperative to controlling gasket leaks in piping and refining operations, depends on the mission-critical performance. It is estimated that up to 92% of all flange leaks are caused by insufficient or loss of bolt preload. Solon brand Flange Washers are designed to maintain sufficient bolt tension and resultant gasket stresses in high temperature and high-pressure applications where safety and emission containment take priority. Solon brand Flange Washers are simply Belleville springs that are designed to be used in flange applications. The springs are engineered to fit into flange designs and the loads are typically higher than standard Belleville washers. Engineered to withstand extreme temperatures as well as corrosive environments. Contact us for an engineered solution to your custom specifications and unique application requirements. Made in USA.
Additional Information | : | 16.42 ft-lb Unlubricated Torque, 20.52 ft-lb Lubricated Torque |
Deflection at Working Load | : | 0.012 in |
Finish | : | Plain |
Flat Load | : | 2775 lb |
Grade | : | 17-7PH |
Hardness | : | 38 to 43 HRC |
Height | : | 0.093 in |
Inside Diameter | : | 0.512 in |
Material | : | Stainless Steel |
Nominal Size | : | 1/2 in |
Outside Diameter | : | 0.9 in |
System of Measurement | : | Imperial |
Thickness | : | 0.082 in |
Working Load | : | 2465 lb |