TECO EP0054 Severe Duty Motor, 5 HP, 1800 RPM, 230/460V, 184T Frame, TEFC

TECO-Westinghouse's MAX-E1® Family is a totally enclosed, fan cooled, NEMA Premium® efficiency motor line built for a wide range of fans, blowers, pumps, compressors, mixers, crushers and conveyor applications, including severe duty and petrochemical service. Rated at 1.15 continuous service factor and designed to NEMA Design B torque as a minimum, the MAX-E1® series pairs a cast iron frame, end brackets, fan cover and main conduit box with a 1045 carbon steel shaft and Class F insulation over a Class B temperature rise for extended operating life. Double shielded, pre-packed bearings are used on 140T-280T frames, with regreasable bearings on 280TS frames and larger. The motor is suitable for inverter duty per NEMA MG-1 Part 31 and is backed by a 36 month warranty from date of manufacture.

TECO-Westinghouse Severe Duty Motor, Model: MAX-E1®, 230/460V, 6.12 Amp (460V), 5 HP, 1800 rpm, 3.7 kW, 3-Phase, 60Hz, TEFC Motor Enclosure, 184T Frame, Bi-Directional Rotation, 4 Poles, Insulation Class: Class F, NEMA Premium® Efficiency Motor Efficiency Group, 89.5 % Efficiency, 1.15 Service Factor, 85.5 % Power Factor, Footed Mounting, Cast Iron, Finish: Polyurethane Paint, Color: Light Gray, 40 deg C

• Output Range: 3/4 - 500 HP
• Speed: 3600, 1800, 1200, 900 RPM
• Enclosure: Totally Enclosed Fan Cooled (143T - 286T, IP54) - (286TS - 449T, IP55)
• Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only
• Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
• CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
• CSA Certified for Class II, Div. 2, Group F & G - Temp Code T3 Minimum (444 Frame and Larger)
• Class F Insulation
• Class B Temperature Rise
• NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
• Cast Iron Frame, End Brackets & Fan Cover and Main Conduit Box
• Grounding Terminal Inside Main Conduit Box
• Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
• Designed for 40°C Ambient Temperature
• Designed for 3300 ft. Elevation
• Bi-Directional Rotation, With the Exception of 2 Pole, #5000 and Larger Ratings are Counter-Clockwise Facing the DE
• 1045 Carbon Steel Shaft
• Aluminum Die Cast Squirrel Cage Rotor Construction for F# 140T - 449T; Copper/Copper Alloy Rotor Construction for F# 5000 and Larger
• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
• Paint Color: Light Gray - Munsell N5.0
• Double Shielded Bearings Pre-Packed with MULTEMP SRL for F# 140T - 280T (Non-Regreasable)
• High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM for F# 280TS and Larger
• Automatic Grease Discharge Fittings on Regreasable Models
• Metal Flinger on Both Ends for F# 286TS and Larger
• Cast Iron Inner and Outer Bearing Caps for F# 280TS and Larger
• Stainless Steel Nameplate
• Dual Column Design Nameplate as Standard (60/50 Hz)
• Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
• Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
• 9 Leads for 5 HP and Smaller
• 12 Leads for 7.5 HP to 125 HP
• 6 Leads for 150 HP and Larger
• Motors are U.L. Approved, CSA Approved; ABS Design Assessment from 250HP-500HP
• Dual Drilled Feet Available on Most Ratings - Longer Frames (i.e. 145T Drilled also for 143T)
• Rubber Dust Flinger on Drive-End for F# 140T - 280T
• Catalog Numbers Ending in "R" Come Standard with Roller Bearings for Belted Applications

• Owner's Manual https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/teco_motors_owners_manual.pdf
• Specification Sheet https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/teco_max_e1_spec_sheet.pdf