TECO-Westinghouse CD4008R Crusher Duty Motor, 400 HP, 900 RPM, 460V, 5808C Frame, TEFC

TECO-Westinghouse MAX-HT™ CD4008R Crusher Duty Motor, 400 HP, 900 RPM, 460V, 5808C Frame, TEFC, Cast Iron, EPAct Efficiency, 487 Amp (460V), 298.4 kW, 3-Phase, 60Hz

TECO-Westinghouse MAX-HT™ CD4008R Crusher Duty Motor, 400 HP, 900 RPM, 460V, 5808C Frame, TEFC, Cast Iron, EPAct Efficiency, 487 Amp (460V), 298.4 kW, 3-Phase, 60Hz CD4008R

MAX-HT™ NEMA Design C EPAct Efficiency Crusher Duty Motor

TECO-Westinghouse's MAX-HT™ Low Voltage Crusher Duty EPAct is a totally enclosed fan cooled motor built for crushers; ball mills/rolling mills; impactors; any high torque application; chippers/shredders. Rated at 1.15 continuous service factor, this crusher duty motor operates on 460V, 3-phase, 60Hz power with EPAct Efficiency and Class F insulation. Construction is cast iron, finished in dark gray, and rated for 40 deg C ambient operation.

TECO-Westinghouse Crusher Duty Motor, Model: MAX-HT™ Low Voltage Crusher Duty EPAct, 460V, 487 Amp (460V), 400 HP, 900 rpm, 298.4 kW, 3-Phase, 60Hz, TEFC Motor Enclosure, 5808C Frame, 4.875 in Dia x 11.88 in L Shaft, CCW/CW Rotation, 1 Speed, Roller (Drive End), Regreasable Bearing, 8 Poles, Quarry Duty, Insulation Class: Class F, EPAct Efficiency Motor Efficiency Group, 95.0 % Efficiency, 1.15 Service Factor, 81.0 % Power Factor, Footed Mounting, Cast Iron, Finish: Polyurethane Paint, Color: Dark Gray, 40 deg C, Additional Information: 10 in L x 1.25 in W Keyway

Additional Information      :      10 in L x 1.25 in W Keyway
Amperage Rating      :      487 A
Bearing Type      :      Roller (Drive End), Regreasable
Color      :      Dark Gray
Duty Type      :      Quarry
Efficiency      :      95.0 %
Finish      :      Polyurethane Paint
Frame Size      :      5808C
Frequency Rating      :      60 Hz
HP Rating      :      400 hp
Insulation Class      :      Class F
Material      :      Cast Iron
Model      :      MAX-HT™ Low Voltage Crusher Duty EPAct
Motor Efficiency Group      :      EPAct Efficiency
Motor Enclosure Type      :      TEFC
Mounting Type      :      Footed
Number of Poles      :      8
Number of Speeds      :      1
Phase      :      3 ph
Power Factor      :      81.0 %
Power Rating      :      298.4 kW
Rotation Type      :      CCW/CW
Service Factor      :      1.15
Shaft Size      :      4.875 in Dia x 11.88 in L
Speed Rating      :      900 rpm
Temperature Rating      :      40 deg C
Voltage Rating      :      460 V
  • Output Range: 300 - 600 HP
  • Speed: 1200, 900 RPM
  • Enclosure: Totally Enclosed Fan Cooled (IP55)
  • Voltage: 460V
  • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design C Torques; Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque
  • Cast Iron Frame, End Brackets; Pressed Steel Plate Main Conduit Box and Fan Cover
  • Cast Iron Main Conduit Box of 505UZ Frame
  • Grounding Terminal Inside Main Conduit Box with additional Foot Grounding Provision
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Designed for 40°C Ambient Temperature
  • Designed for 3300 ft. Elevation
  • Bi-Directional Rotation
  • High Strength 4140 AISI Steel Shaft
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5
  • High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex EM
  • Automatic Grease Discharge Fittings
  • Metal Flinger on Both Ends
  • Cast Iron Inner and Outer Bearing Caps
  • Stainless Steel Nameplate
  • Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
  • Inverter Duty Speed Range: 3:1 Constant Torque
  • 6 Leads
  • Standard With Thermistors (PTC 140°C) 1 per Phase
  • Locknut and Washer on NDE for Vertical Shaft Down Applications
  • Drain Holes / Plugs on Both End Brackets for Vertical Applications
  • Threaded One Way Breather Drains for Horizontal Mount Applications
  • Motors are CSA Approved
  • Spotface ¼ -28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger
  • pdfSpecification Sheet https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/teco_max_ht_design_c_spec_sheet.pdf
  • pdfOwner's Manual https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/teco_motors_owners_manual.pdf