MAX-HT™ NEMA Design C Crusher Duty Motor
TECO-Westinghouse's MAX-HT™ Low Voltage Crusher Duty is a totally enclosed fan cooled motor built for crushers; ball mills/rolling mills; chippers/shredders; impactors; any high torque application. Rated at 1.15 continuous service factor, this crusher duty motor operates on 230/460V, 3-phase, 60Hz power with NEMA Premium® Efficiency and Class F insulation. Construction is cast iron, finished in dark gray, and rated for 40 deg C ambient operation.
TECO-Westinghouse Crusher Duty Motor, Model: MAX-HT™ Low Voltage Crusher Duty, 230/460V, 62.0 Amp (460V), 50 HP, 900 rpm, 37.3 kW, 3-Phase, 60Hz, TEFC Motor Enclosure, 404T Frame, 2.875 in Dia x 7.25 in L Shaft, CCW/CW Rotation, 1 Speed, Ball, Regreasable Bearing, 8 Poles, Quarry Duty, Insulation Class: Class F, NEMA Premium® Efficiency Motor Efficiency Group, 93.0 % Efficiency, 1.15 Service Factor, 81.0 % Power Factor, Footed Mounting, Cast Iron, Finish: Polyurethane Paint, Color: Dark Gray, 40 deg C, Additional Information: 5.65 in L x 0.75 in W Keyway
| Additional Information |
: |
5.65 in L x 0.75 in W Keyway |
| Amperage Rating |
: |
62.0 A |
| Bearing Type |
: |
Ball, Regreasable |
| Color |
: |
Dark Gray |
| Duty Type |
: |
Quarry |
| Efficiency |
: |
93.0 % |
| Finish |
: |
Polyurethane Paint |
| Frame Size |
: |
404T |
| Frequency Rating |
: |
60 Hz |
| HP Rating |
: |
50 hp |
| Insulation Class |
: |
Class F |
| Material |
: |
Cast Iron |
| Model |
: |
MAX-HT™ Low Voltage Crusher Duty |
| Motor Efficiency Group |
: |
NEMA Premium® Efficiency |
| Motor Enclosure Type |
: |
TEFC |
| Mounting Type |
: |
Footed |
| Number of Poles |
: |
8 |
| Number of Speeds |
: |
1 |
| Phase |
: |
3 ph |
| Power Factor |
: |
81.0 % |
| Power Rating |
: |
37.3 kW |
| Rotation Type |
: |
CCW/CW |
| Service Factor |
: |
1.15 |
| Shaft Size |
: |
2.875 in Dia x 7.25 in L |
| Speed Rating |
: |
900 rpm |
| Temperature Rating |
: |
40 deg C |
| Voltage Rating |
: |
230/460 V |
- Output Range: 20 - 500 HP
- Speed: 1800, 1200, 900 RPM
- Enclosure: Totally Enclosed Fan Cooled (IP55)
- Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only
- Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
- CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
- CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum (Frame 444T and above)
- Class F Insulation
- Class B Temperature Rise
- NEMA Design C Torques; Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque
- Cast Iron Frame, End Brackets, Main Conduit Box; Rolled Steel Fan Cover
- Grounding Terminal Inside Main Conduit Box
- Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
- Designed for 40°C Ambient Temperature
- Designed for 3300 ft. Elevation
- Bi-Directional Rotation
- High Strength 4140 AISI Steel Shaft
- Aluminum Die Cast Squirrel Cage Rotor Construction
- Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
- Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5
- High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex EM
- Automatic Grease Discharge Fittings
- Gamma (Axial Face) Seal on Both Ends for F# 140T - 400T
- Labyrinth Type Metal Flinger on Both Ends for F# 440T and Larger
- Cast Iron Inner and Outer Bearing Caps for F# 320T and Larger
- Stainless Steel Nameplate
- New Dual Column Design Nameplate as Standard (60/50 Hz)
- Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
- Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
- 12 Leads for 125 HP and Smaller
- 6 Leads for 150 HP and Larger
- Standard With Thermistors (PTC 140°C) 1 per Phase
- Locknut and Washer on NDE for Vertical Shaft Down Applications on F# 440 and Larger
- Drain Holes / Plugs on Both End Brackets for Vertical Applications
- Threaded One Way Breather Drains for Horizontal Mount Applications
- Spotface ¼ -28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger
-
Specification Sheet
https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/teco_max_ht_design_c_spec_sheet.pdf
-
Owner's Manual
https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/teco_motors_owners_manual.pdf