TECO-Westinghouse CDP2506RZ Crusher Duty Motor, 250 HP, 1200 RPM, 460V, 586/7UZ Frame, TEFC

TECO-Westinghouse MAX-HT™ CDP2506RZ Crusher Duty Motor, 250 HP, 1200 RPM, 460V, 586/7UZ Frame, TEFC, Cast Iron, NEMA Premium Efficiency, 305 Amp (460V), 186.5 kW, 3-Phase, 60Hz

TECO-Westinghouse MAX-HT™ CDP2506RZ Crusher Duty Motor, 250 HP, 1200 RPM, 460V, 586/7UZ Frame, TEFC, Cast Iron, NEMA Premium Efficiency, 305 Amp (460V), 186.5 kW, 3-Phase, 60Hz CDP2506RZ

MAX-HT™ NEMA Design A Crusher Duty Motor

TECO-Westinghouse's MAX-HT™ Low Voltage Crusher Duty is a totally enclosed fan cooled motor built for crushers; ball mills/rolling mills; chippers/shredders; impactors; any high torque application. Rated at 1.15 continuous service factor, this crusher duty motor operates on 460V, 3-phase, 60Hz power with NEMA Premium® Efficiency and Class F insulation. Construction is cast iron, finished in dark gray, and rated for 40 deg C ambient operation.

TECO-Westinghouse Crusher Duty Motor, Model: MAX-HT™ Low Voltage Crusher Duty, 460V, 305 Amp (460V), 250 HP, 1200 rpm, 186.5 kW, 3-Phase, 60Hz, TEFC Motor Enclosure, 586/7UZ Frame, 4.375 in Dia x 11.625 in L Shaft, CCW/CW Rotation, 1 Speed, Ball, Regreasable Bearing, 6 Poles, Quarry Duty, Insulation Class: Class F, NEMA Premium® Efficiency Motor Efficiency Group, 95.8 % Efficiency, 1.15 Service Factor, 80.2 % Power Factor, Footed Mounting, Cast Iron, Finish: Polyurethane Paint, Color: Dark Gray, 40 deg C, Additional Information: 8.661 in L x 1 in W Keyway

Additional Information      :      8.661 in L x 1 in W Keyway
Amperage Rating      :      305 A
Bearing Type      :      Ball, Regreasable
Color      :      Dark Gray
Duty Type      :      Quarry
Efficiency      :      95.8 %
Finish      :      Polyurethane Paint
Frame Size      :      586/7UZ
Frequency Rating      :      60 Hz
HP Rating      :      250 hp
Insulation Class      :      Class F
Material      :      Cast Iron
Model      :      MAX-HT™ Low Voltage Crusher Duty
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      TEFC
Mounting Type      :      Footed
Number of Poles      :      6
Number of Speeds      :      1
Phase      :      3 ph
Power Factor      :      80.2 %
Power Rating      :      186.5 kW
Rotation Type      :      CCW/CW
Service Factor      :      1.15
Shaft Size      :      4.375 in Dia x 11.625 in L
Speed Rating      :      1200 rpm
Temperature Rating      :      40 deg C
Voltage Rating      :      460 V
  • Output Range: 20 - 500 HP
  • Speed: 1800, 1200, 900 RPM
  • Enclosure: Totally Enclosed Fan Cooled (IP55)
  • Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only
  • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
  • CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Minimum
  • CSA Certified for Class II, Div. 2, Groups F & G - Temp Code T3 Minimum (Frame 444T and above)
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design A Torques; Equal or Greater Than 200% Starting Torque / 250% Breakdown Torque
  • Cast Iron Frame, End Brackets, Main Conduit Box; Rolled Steel Fan Cover
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Designed for 40°C Ambient Temperature
  • Designed for 3300 ft. Elevation
  • Bi-Directional Rotation
  • High Strength 4140 AISI Steel Shaft
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Dark Gray - Munsell 7.5 BG 3.5/0.5
  • High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex EM
  • Automatic Grease Discharge Fittings
  • Gamma (Axial Face) Seal on Both Ends for F# 140T - 400T
  • Labyrinth Type Metal Flinger on Both Ends for F# 440T and Larger
  • Cast Iron Inner and Outer Bearing Caps for F# 320T and Larger
  • Stainless Steel Nameplate
  • New Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
  • 12 Leads for 125 HP and Smaller
  • 6 Leads for 150 HP and Larger
  • Standard With Thermistors (PTC 140°C) 1 per Phase
  • Locknut and Washer on NDE for Vertical Shaft Down Applications on F# 440 and Larger
  • Drain Holes / Plugs on Both End Brackets for Vertical Applications
  • Threaded One Way Breather Drains for Horizontal Mount Applications
  • Spotface ¼ -28UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger
  • pdfSpecification Sheet https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/teco_max_ht_design_a_spec_sheet.pdf
  • pdfOwner's Manual https://www.eindustrialsolutions.com//ASSETS/DOCUMENTS/ITEMS/EN/teco_motors_owners_manual.pdf