Thermal Transfer A-1024-6-6-F-BR Water-Cooled Oil Cooler

TTP A-1024 A-1024-6-6-F-BR Industrial Hydraulic Oil Cooler, Up to 500 hp Heat Removed, 37 gpm, 1-1/2 in Oil Inlet Port

TTP A-1024 A-1024-6-6-F-BR Industrial Hydraulic Oil Cooler, Up to 500 hp Heat Removed, 37 gpm, 1-1/2 in Oil Inlet Port 204584

The A Series is a legacy product developed to interchange with ITT/Standard X-Change. Its non-ferrous design (brass shell) is ideal for water to water, including sea water cooling applications. This unit is not recommended for new applications.
Our industrial solutions offer air cooled oil coolers built with our without electric AC motors and water cooled shell and tube coolers designed for multiple fluid types and built from aluminum, copper and steel for fluid power related applications.

Compatible Hydraulic Fluids      :      Bearing Lube Oil, Hydraulic Motor Oil, Hydrostatic Drive Oil and Lube Oil Circuits
Dimensions      :      28.38 in L
Flow Rate      :      37 gpm
HP Heat Removed      :      Up to 500 hp
Maximum Oil Pressure      :      300 psi
Maximum Oil Temperature      :      110 to 130 deg F Hydraulic Motor Oil, 130 to 180 deg F Hydrostatic Drive Oil, 120 to 160 deg F Bearing Lube Oil, 110 to 130 deg F Lube Oil Circuits
Maximum Water Pressure      :      150 psi
Model      :      A-1024
Mounting Type      :      Feet
Oil Cooler Material      :      Brass
Oil Inlet Port Connection Type      :      NPT
Oil Inlet Port Size      :      1-1/2 in
Oil Outlet Port Connection Type      :      NPT
Oil Outlet Port Size      :      1-1/2 in
Operating Temperature      :      300 deg F
Water Inlet Port Connection Type      :      NPT
Water Inlet Port Size      :      1 in
Water Outlet Port Connection      :      NPT
Water Outlet Port Size      :      1 in
  • Up to +500 hp of heat removal from hydraulic oil
  • Round tube copper, brass or steel
  • Brazed aluminum plate and bar (P-BAR™)
  • Extruded aluminum tube (T-BAR™)
  • Aluminum/steel fin construction
  • All aluminum brazed
  • Steel, copper, copper/nickel or stainless steel construction
  • Brazed plate construction
  • Internal fins
  • Diameters up to 10 in
  • Lengths up to 12 ft
  • ITT interchange
  • B or HC Series is recommended for new applications
  • Competitively priced
  • End bonnets removable for servicing
  • Mounting feet included (may be rotated in 90 deg increments)
  • 6 in baffle spacing, 3/8 in tube size
  • Four pass tubeside, copper cooling tube material
  • Cast iron end bonnet material
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/TTP_A_1014_1_5_6_F_BR_Catalog.pdf