Thermal Transfer AOC-33-1-30 1 PHASE MOTOR Air-Cooled Oil Cooler

TTP AOC-33 AOC-33-1-30 1 PHASE MOTOR Industrial Hydraulic Oil Cooler, 115/230 V, 1-Phase, Up to 500 hp Heat Removed

TTP AOC-33 AOC-33-1-30 1 PHASE MOTOR Industrial Hydraulic Oil Cooler, 115/230 V, 1-Phase, Up to 500 hp Heat Removed 93022-1PH

The Industrial AOC Series features an AC fan drive and is ideal for low flow applications. This cooler is a cost effective solution for power unit applications and is available in single or dual fan designs. The dual rated (50/60 Hz) electric motor allows for application flexibility. Removable air filters prevent air-side core blockage (clogging of fins with debris) and aggressive turbulators allow for optimal heat rejection at lower flow rates.
Our industrial solutions offer air cooled oil coolers built with our without electric AC motors and water cooled shell and tube coolers designed for multiple fluid types and built from aluminum, copper and steel for fluid power related applications.

Amperage Rating      :      1.4/2.1/2.8/4.2 A
Compatible Hydraulic Fluids      :      Bearing Lube Oil, Hydraulic Motor Oil, Hydrostatic Drive Oil and Lube Oil Circuits
Dimensions      :      28 in H x 31.91 in W x 13.19 in D
Fan Blade Material      :      Aluminum/Steel
Flow Rate      :      150 gpm
HP Heat Removed      :      Up to 500 hp
Maximum Oil Temperature      :      110 to 130 deg F Hydraulic Motor Oil, 130 to 180 deg F Hydrostatic Drive Oil, 120 to 160 deg F Bearing Lube Oil, 110 to 130 deg F Lube Oil Circuits
Model      :      AOC-33
Motor Enclosure Type      :      TEAO
Motor Frame Size      :      Custom
Motor HP Rating      :      1/4 hp
Mounting Type      :      Bracket
Oil Inlet Port Connection Type      :      NPT
Oil Inlet Port Size      :      1 in
Oil Outlet Port Connection Type      :      NPT
Oil Outlet Port Size      :      1 in
Operating Temperature      :      350 deg F
Phase      :      1 ph
Pressure Rating      :      300 psi
Speed Rating      :      1700 rpm, 1350 rpm
Voltage Rating      :      115/230 V
  • Up to +500 hp of heat removal from hydraulic oil
  • Round tube copper, brass or steel
  • Brazed aluminum plate and bar (P-BAR™)
  • Extruded aluminum tube (T-BAR™)
  • Aluminum/steel fin construction
  • All aluminum brazed
  • Steel, copper, copper/nickel or stainless steel construction
  • Brazed plate construction
  • Internal fins
  • Diameters up to 10 in
  • Lengths up to 12 ft
  • Low cost
  • Quiet operation
  • For low flow rates
  • Perfect for off-line recirculation loop
  • 60/50 Hz motor
  • 30 psi bypass
  • pdfCatalog