Thermal Transfer EK-1012-T-CN Water-Cooled Oil Cooler

TTP EK-1012 EK-1012-T-CN Industrial Hydraulic Oil Cooler, Up to 400 hp Heat Removed, 80 gpm, 28 gpm, 2 in Oil Inlet Port

TTP EK-1012 EK-1012-T-CN Industrial Hydraulic Oil Cooler, Up to 400 hp Heat Removed, 80 gpm, 28 gpm, 2 in Oil Inlet Port 208385

The EK Series – the "Green" cooler – is the most efficient heat exchanger offered in the water cooled series. The aluminum finned tube bundle design provides an increased surface area that allows for optimal heat rejection with low water usage. An optional Surge-Cushion® bypass is available for cold start up protection or flow surges. Sea water service options are also available. The low cost, compact design is ideal for general purpose hydraulic power unit installations.
Our industrial solutions offer air cooled oil coolers built with our without electric AC motors and water cooled shell and tube coolers designed for multiple fluid types and built from aluminum, copper and steel for fluid power related applications.

Compatible Hydraulic Fluids      :      Automatic Transmission Fluid, Hydraulic Motor Oil, Hydrostatic Drive Oil and Lube Oil Circuits
Dimensions      :      14.58 in L x 6.5 in W x 7.64 in H
Flow Rate      :      80 gpm, 28 gpm
HP Heat Removed      :      Up to 400 hp
Maximum Oil Pressure      :      500 psi
Maximum Oil Temperature      :      110 to 130 deg F Hydraulic Motor Oil, 130 to 180 deg F Hydrostatic Drive Oil, 110 to 130 deg F Lube Oil Circuits, 200 to 300 deg F Automatic Transmission Fluid
Maximum Water Pressure      :      150 psi
Model      :      EK-1012
Mounting Type      :      Bracket
Oil Cooler Material      :      Steel
Oil Inlet Port Connection Type      :      NPT
Oil Inlet Port Size      :      2 in
Oil Outlet Port Connection Type      :      NPT
Oil Outlet Port Size      :      2 in
Operating Temperature      :      250 deg F
Water Inlet Port Connection Type      :      NPT
Water Inlet Port Size      :      1 in
Water Outlet Port Connection      :      NPT
Water Outlet Port Size      :      1 in
  • Up to +500 hp of heat removal from hydraulic oil
  • Round tube copper, brass or steel
  • Brazed aluminum plate and bar (P-BAR™)
  • Extruded aluminum tube (T-BAR™)
  • Aluminum/steel fin construction
  • All aluminum brazed
  • Steel, copper, copper/nickel or stainless steel construction
  • Brazed plate construction
  • Internal fins
  • Diameters up to 10 in
  • Lengths up to 12 ft
  • Compact size
  • High efficiency finned bundle design
  • Oil flow rates up to 80 US gpm (300 L/min)
  • Large oil connections for minimum entering and exiting flow restriction
  • Removable end bonnets for easy tube cleaning
  • Mounting brackets designed so that cooler can be rotated in 90 deg increments
  • High pressure rating, green friendly
  • 3/16 in tube size, two pass tubeside, CuNi cooling tube material, steel tubesheet material, cast iron end bonnet material
  • Without Surge-Cushion® bypass
  • pdfCatalog