Transair EX01 L1 00 3" ID (76 mm) Fixing Clip for Rigid Pipe

Transair® pipe hangers are lightweight and easy to install. All hangers are installed by positioning a threaded rod into a fixed position, then threading the pipe hanger onto the rod. This installation method keeps the piping stable during the expansion and contraction of the system. To overcome most pipe routing challenges, Parker offers spacers and threaded rod adapters that can be used to extend the pipe below or away from an obstacle. Transair® compressed air piping can only be hung using Transair® pipe hangers. The use of non-Transair® hangers can void the warranty. All hangers are 100% recyclable, silicone-free and made from materials with no propagation of flame. All hangers conform to the UL94V-2 standard. Parker Hannifin warrants all Transair® components to be free of defects in material and workmanship for 10 years from the date of installation. Each Transair® pipe hanger can support 44 lb, but Parker suggests using two clips per length of pipe. For proper installation and placement of the hangers, download our installation manual.
Transair® Pipe Hanger, 3 in Trade, 44 lb Load, 316 Stainless Steel, 188 psi, 232 psi, -4 to 140 deg F

• Modular and reusable
• 100% recyclable
• Faster installation
• Lower installation costs

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Transair_6699_01_01_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Transair_6650_00_00_04_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Transair_6697_17_01_Specification_Sheet.pdf