(888) 979-5190 Toll-Free
WEG 00318ET3ER182TC-S 00318ET3ER182TC-S

WEG 00318ET3ER182TC-S General Purpose Motor

WEG 00318ET3ER182TC-S Motor, 230/460/190 to 220/380 to 415 VAC, 7.62/3.81/9.08/8.3/4.54/4.4 A, 3 hp, 2.2 kW, 3 ph -Phase

WEG 00318ET3ER182TC-S Motor, 230/460/190 to 220/380 to 415 VAC, 7.62/3.81/9.08/8.3/4.54/4.4 A, 3 hp, 2.2 kW, 3 ph -Phase 00318ET3ER182TC-S

W01 is a rolled steel motor that is perfect for applications where performance, robustness and lightweight are required in an all one solution. WEG Motor, 230/460/190 to 220/380 to 415 VAC, 7.62/3.81/9.08/8.3/4.54/4.4 A, 3 hp, 1765 rpm, 1455 rpm, 1460 rpm, 2.2 kW, 3 ph Phase, 50 Hz, 60 Hz, IC411 TEFC, IP55 Motor Enclosure, 182/4TC Frame, 1-1/8 in Dia x 2-3/4 in L Shaft, CW, CCW Rotation, Ball Bearing, 7.252 in Bolt Circle Diameter, 4 Poles, Continuous, Direct On Line Starting Method, Class F Insulation Class, NEMA Premium® Efficiency Motor Efficiency Group, 86.7%, 87%, 89.5% Efficiency, 1.15 Service Factor, 0.81, 0.83, 0.85 Power Factor, C-Face Flange, W-6 Footless Mounting, Rolled Steel, Matte, Black, -20 to 40 deg C, 10.079 in Dia x 19.291 in L

Amperage Rating      :      7.62/3.81/9.08/8.3/4.54/4.4 A
Bearing Type      :      Ball
Bolt Circle Diameter      :      7.252 in
Color      :      Black
Dimensions      :      10.079 in Dia x 19.291 in L
Duty Type      :      Continuous
Efficiency      :      86.7%, 87%, 89.5%
Finish      :      Matte
Frame Size      :      182/4TC
Frequency Rating      :      50 Hz, 60 Hz
HP Rating      :      3 hp
Insulation Class      :      Class F
Material      :      Rolled Steel
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      IC411 TEFC, IP55
Mounting Type      :      C-Face Flange, W-6 Footless
Number of Poles      :      4
Phase      :      3 ph
Power Factor      :      0.81, 0.83, 0.85
Power Rating      :      2.2 kW
Rotation Type      :      CW, CCW
Service Factor      :      1.15
Shaft Size      :      1-1/8 in Dia x 2-3/4 in L
Speed Rating      :      1765 rpm, 1455 rpm, 1460 rpm
Starting Method      :      Direct On Line
Temperature Rating      :      -20 to 40 deg C
Voltage Rating      :      230/460/190 to 220/380 to 415 VAC
  • Aluminum end shields
  • Internal bolts, giving a clean surface to the motor, avoiding trapping materials and allowing easy paint job after assembly to the load if required
  • New ventilation system for improved thermal performance
  • Robust feet design suitable for tougher applications
  • Oversized diagonally split aluminum terminal box that exceeds IP55 requirements
  • Terminal box rotatable in 90 deg increments for flexibility during installation
  • Color-coded leads as standard for easy wiring
  • IP55 ingress protection as standard, being appropriate for severe environments
  • Suitable for VFD operation as per NEMA MG1 part 31.4.4.2
  • Motor frame painting system 500 hr salt spray-resistant
  • Cast iron flanges for improved strength (182/4TC and larger)
  • Double shielded ball bearings
  • New and more robust eyebolts design (frames 182/4T and up)
  • Bearing cap as standard on flanged motor
  • Left position terminal box
  • Without overload protector
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/WEG_1218OS1B48CH_S_Catalog.pdf